12.PDF

(62 KB) Pobierz
SECTION 1
QUICK START GUIDE
MOTOROLA
DSP56302EVMUM/AD, Preliminary
1-1
Quick Start Guide
1.1
1.2
1.2.1
1.2.2
1.3
1.3.1
1.3.2
1.3.3
1.3.4
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What You Get with the DSP56302EVM . . . . . . . . . . . . . .
What You Need to Supply. . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . .
Preparing the DSP56302EVM . . . . . . . . . . . . . . . . . . . . .
Connecting the DSP56302EVM to the PC and Power . . .
Installing the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing the DSP56302EVM . . . . . . . . . . . . . . . . . . . . . . .
1-3
1-3
1-3
1-4
1-4
1-5
1-7
1-8
1-9
1-2
DSP56302EVMUM/AD, Preliminary
MOTOROLA
Quick Start Guide
Overview
1.1
OVERVIEW
This section provides a summary description of the evaluation module contents,
additional requirements, and quick installation and test information. Detailed
information about the DSP56302EVM design and operation is provided in the
remaining sections of this manual.
1.2
EQUIPMENT
The following section gives a brief summary of the equipment required to use the
DSP56302 Evaluation Module (DSP56302EVM), some of which will be supplied with
the module, and some of which must be supplied by the user.
1.2.1
What You Get with the DSP56302EVM
The following material is provided with the DSP56302EVM:
• DSP56302 Evaluation Module board
• DSP56302EVM Product Information
• DSP56302 Technical Data (preliminary)
• DSP56302 Chip Errata
• DSP56300 Family Manual
• DSP56302 Product Specifications Revision 1.03
• DSP56302EVM User’s Manual (this document)
• Crystal Semiconductor CS4215 16-Bit Multimedia Audio Codec Data Sheet
• Domain Technologies Debug-56K Debugger manual for Motorola 16- and
24-bit DSPs
• Set of diskettes (3-1/2 inch) containing required software:
–
–
GUI Debugger from Domain Technologies (1 diskette)
Assembler/linker/example software from Motorola (1 diskette)
MOTOROLA
DSP56302EVMUM/AD, Preliminary
1-3
Quick Start Guide
Installation Procedure
1.2.2
What You Need to Supply
• PC (386 class or higher) with:
–
–
–
–
–
–
Windows 3.1 or higher (including Windows 95)
4 Mbytes of memory minimum
3-1/2-inch, high density, diskette drive
Hard drive with 4 Mbytes of free disk space
Mouse
RS-232 serial port supporting 9,600–57,600 bit-per-second transfer rates
• RS-232 interface cable (DB9 male to DB9 female)
• Power supply, 7–9 V ac or dc input into a 2.1 mm power connector
• Audio source (tape player, radio, CD player, etc.)
• Headphones
• Audio interface cable with 1/8-inch stereo plugs
1.3
INSTALLATION PROCEDURE
Installation requires four basic steps:
1. Preparing the DSP56302EVM board
2. Connecting the board to the PC and power
3. Installing the software
4. Testing the installation
1-4
DSP56302EVMUM/AD, Preliminary
MOTOROLA
Quick Start Guide
Installation Procedure
1.3.1
Preparing the DSP56302EVM
CAUTION
Because all electronic components are
sensitive to the effects of electrostatic
discharge
(ESD)
damage,
correct
procedures should be used when
handling all components in this kit and
inside the supporting personal computer.
Use the following procedures to minimize
the likelihood of damage due to ESD:
– Always handle all static-sensitive
components only in a protected area,
preferably a lab with conductive
(anti-static) flooring and bench
surfaces.
– Always use grounded wrist straps
when handling sensitive components.
– Never remove components from
anti-static packaging until required for
installation.
– Always transport sensitive
components in anti-static packaging.
Locate jumper blocks J4, J7, and J9, as shown in
Figure 1-1
. Make sure that, for blocks
J4 and J7, all six positions on each block are jumpered, and for J9, there is a jumper
connecting pins 2 and 3. These jumpers perform the following functions:
• J4 controls the interface between the DSP56302 JTAG/OnCE port and
DSP56002 Synchronous Serial Interface (SSI).
• J7 controls the interface between the audio codec and the DSP56302 Enhanced
Synchronous Serial Interface (ESSI0).
• J9 defines the external memory map.
MOTOROLA
DSP56302EVMUM/AD, Preliminary
1-5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin