Dayton-Audio-DAEX32EP-4-Specifications.pdf

(187 KB) Pobierz
DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm
DAEX32EP-4
PARAMETERS
Impedance
Re
Le
Fs
Qms
Qes
Qts
Mms
Cms
Sd
Vd
BL
Vas
Xmax
VC Diameter
SPL
RMS Power Handling
Usable Frequency Range (Hz)
4 ohms
3.3 ohms
0.21 mH @ 1 kHz
395 Hz
N/A
N/A
1.38
5.4 g
0.08 mm/N
N/A
N/A
4.2 Tm
N/A
N/A
32 mm
N/A
40 watts
N/A
FEATURES
Robust, heavy-duty design with a 32 mm voice coil attached to a steel spider
Pre-applied 3M™ VHB™ adhesive for quick, secure installation
Rare-earth neodymium motor and a proprietary two-layer voice coil
4 ohms impedance for use with small, Class D amplifiers
40 watt RMS power handling for high output
APPLICATIONS
Invisibile home theater and multi-room audio
Electronic gaming machines
Advertising signage
Point-of-purchase displays
Multimedia exhibits
Commercial distributed audio
Kiosks
Automotive audio
Bathroom tubs and showers
IMPEDANCE/PHASE
Measurement taken with transducer uncoupled facing upward.
FREQUENCY RESPONSE
1/3
rd
octave smoothing - measurement taken with transducer adhered off-center
on a 12" x 12" x �½" foam core board in an infinite baffle setup.
Note: This information is for comparison purposes only, the actual frequency response will depend on many factors of which the diaphragm being the greatest contributor.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin