110902-cd-dvd-bluray-spindle-dd652741-6a62-400f-a975-7b25f1a535e9.pdf

(255 KB) Pobierz
CD / DVD / Bluray
Spindle
xander1
VIEW IN BROWSER
updated 7. 1. 2022 | published 2. 1. 2022
Summary
Parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top
to prevent them falling off.
3.88 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
PLA
48 g
d
Prusa
MK3/S/S+
Household
>
Office
Tags:
storage
dvd
spindle
cd
bluray
This is a parameterized spindle for storing CDs / DVDs / Blurays with a
screw-on top to prevent the discs falling off.
It fits all the disc types listed above and has a small bump on the bottom
so the bottom disc does not scratch on the base of the spindle.
I printed this spindle in PLA+. However, I think PLA or basically any other
non-flex material will be fine as well.
Please post a Make of this print if you liked it and it was useful to you.
Thank you!
Customization
I have attached the Fusion 360 design file. You can customize the spindle
to your liking. The most relevant parameter, the height of the spindle pin
in the middle, is favorited (see screenshot).
The STLs and 3mf files provided have a spindle height of 5cm. If you need
other dimensions are unable to customize the design yourself, feel free the
send me a message.
Print Settings
Material: PLA / PLA+.
Suggested infill percentage: 20%
Layer height: 0.2mm or finer (because of the thread)
Other settings do not really matter.
Model files
STLs
2 files
dvd-spindle.stl
screw-on-top.stl
dvd-spindle.f3d
dvd-spindle-with-screw-on-top.3mf
Print files
dvd-spindle-with-screw-on-top_02mm_pla_mk3s_3h5.gcode
h
PLA
k
0.40 mm
f
0.20 mm
3.88 hrs
48 g
d
Prusa MK3/S/S+
License
This work is licensed under a
Creative Commons (4.0 International License)
Attribution
✖
✔
✔
✔
✔
|
|
|
|
|
Sharing without ATTRIBUTION
Remix Culture allowed
Commercial Use
Free Cultural Works
Meets Open Definition

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin