301356-mounting-plate-for-steel-pipe-railing-b3ff2e1b-c0fa-4a0f-98cb-3852180ba436.pdf

(107 KB) Pobierz
3D
Mounting Plate for
Steel Pipe Railing
S
Sam
M
O
D
EL
O
N
LY
VIEW IN BROWSER
updated 23. 1. 2023 | published 23. 1. 2023
Summary
Brackets to fix a rectangular pole on a steel pipe railing.
Household
>
Outdoor & Garden
Tags:
pipe
railings
railing
handrail
railingmount
handrailbracket
I designed these brackets to fixate the bird feeder having a 70x70mm
wooden pole at my railing in winter time.
Basically you can use just 2 screws for each bracket if you want to remove
the pole more often. But additional 2 screws can be used to secure against
unintended lifting.
There is brackets for a 42.0mm and a 26.5mm steel pipe.
The 26.5mm additionally is available also with 2mm offset in case you
have a protecting foot (like
https://www.printables.com/model/360565-
protection-foot-for-wood-pole).
The nuts have been design with my nut clearing template (https://
www.printables.com/model/364572-nut-clearing-templates),
which means:
• nut cavity can be printed without any support
• for easy assembly nuts can be pressed in and will not fall out again
For each holder you need:
• 4x screw M5x16
• 4x nut M5
For the pole you need:
• 4x screw 4 x 40 mm
Printing:
Filament:
ASA or PETG
Infill:
for maximum robustness I used 100%
Support:
not needed
Model files
front_420_560_10_v100.stl
front plate for 42.0 mm pipe
back_420_v100.stl
bracket for 42.0 mm pipe
front_265_560_875_v100.stl
front plate for 26.5 mm pipe
back_265_v100.stl
bracket for 26.5 mm pipe
front_265_560_675_v100.stl
front plate for 26.5 mm pipe with 2 mm gap
License
This work is licensed under a
Creative Commons (4.0 International License)
Attribution
✖
✔
✔
✔
✔
|
|
|
|
|
Sharing without ATTRIBUTION
Remix Culture allowed
Commercial Use
Free Cultural Works
Meets Open Definition

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin